How can we collect assurance-ready climate data for ESRS E1?
Assurance-ready climate data for ESRS E1 is data that an auditor can trace from a reported figure back to its source, method, and owner. You get there by assigning clear data owners, documenting every methodology and emission factor, applying repeatable controls, and keeping evidence in one place.
Start early, because limited assurance under CSRD looks at process as well as numbers. Most teams struggle with the same things: scattered data, unclear responsibilities, and Scope 3 estimates that nobody can fully explain. The sections below walk through the questions that come up most often.
Which ESRS E1 datapoints need the strongest evidence?
The datapoints with the highest quantitative weight and the most judgement need the strongest evidence. In ESRS E1, that mainly means gross Scope 1, 2, and 3 GHG emissions, total energy consumption and mix, and any transition plan targets. Anything an auditor cannot recalculate or trace to a source will draw questions.
Not every datapoint carries the same risk. A practical way to prioritise is to rank them by size, complexity, and reliance on estimates:
- GHG emissions (Scope 1, 2, 3): These are calculated figures built from activity data and emission factors, so auditors check both inputs and methods.
- Energy consumption and mix: Invoices, meter readings, and supplier statements should back every number, including the split between renewable and non-renewable sources.
- GHG reduction targets and baseline year: Auditors want to see how the baseline was set and how you handle recalculations after acquisitions or methodology changes.
- Transition plan and climate actions: Narrative claims need supporting documents such as board decisions, capex plans, and project records.
- Financial effects of climate risks: These rely on assumptions and scenarios, so the reasoning must be written down and consistent with your financial statements.
Once you know where the scrutiny will land, the next step is to work out who holds the data behind each of these datapoints.
How should climate data owners and sources be mapped?
Map each ESRS E1 datapoint to one named owner, one primary source system, and one collection frequency. A simple data ownership matrix does this well. It shows who provides the data, who reviews it, and where the evidence is stored, so nothing depends on one person’s memory.
Start from the datapoint list and work backwards. For fuel use, the owner might be facilities or fleet management. For purchased electricity, it could be finance or procurement. For business travel, HR or a travel agency. Write down the source system for each, such as an ERP, utility portal, or supplier file.
A few details make the matrix far more useful:
- Separate the provider from the reviewer. The person who delivers the data should not be the only one who checks it.
- Record the reporting boundary. Note which entities, sites, and facilities are included, and keep it aligned with your financial reporting scope.
- Set deadlines per owner. Fixed dates for submission and review keep the process from slipping into the last week.
With owners and sources in place, you can add the controls that make the numbers defensible.
What controls make climate data audit-ready?
Audit-ready climate data comes from repeatable controls: input validation, reconciliation to source records, review and sign-off, version control, and a documented audit trail. Controls should work the same way every reporting cycle so an auditor can test them, not just read about them.
Think of controls in three layers: at collection, at consolidation, and at sign-off.
Controls at data collection
Use standard templates with defined units, fields, and instructions. Ask data owners to attach supporting evidence, such as invoices or meter screenshots, when they submit. Build simple validation rules, for example, flagging a site whose energy use jumps 40% year on year without explanation.
Controls at consolidation and sign-off
Reconcile reported totals back to source records, such as utility invoices or ERP extracts. Run year-on-year variance checks and record the explanations. Then require a documented review by someone other than the preparer, and lock the final dataset so later changes leave a visible trail.
Controls only work if the calculations behind them are transparent, which brings us to emission factors and methods.
How do you document emission factors and methodologies?
Document every emission factor with its name, publisher, version, year, and the activity it applies to. Pair this with a written methodology that explains the calculation approach, boundaries, assumptions, and exclusions. An auditor should be able to rebuild any emissions figure using only your documentation.
A methodology document usually covers these points:
- Standard and approach: State that you follow the GHG Protocol, and say whether you use location-based, market-based, or both methods for Scope 2.
- Emission factor library: List each factor, its source, and the date you retrieved it. Keep old versions so prior-year figures stay reproducible.
- Assumptions and estimates: Explain where you used proxies or extrapolations and why, with the reasoning behind them.
- Changes and recalculations: Record any change in method or factor, its impact, and whether you restated earlier years.
Consistency matters as much as accuracy. If you switch factor sources between years, explain the change clearly, because unexplained shifts look like errors. The same discipline carries into the area where evidence is hardest to obtain: the value chain.
How can Scope 3 data meet assurance expectations?
Scope 3 data meets assurance expectations when you show a clear, reasoned method for each category, prioritise by materiality, and explain the quality of your inputs. Auditors do not expect perfect supplier data. They expect transparent estimates, documented assumptions, and a plan to improve data quality over time.
Begin by screening all 15 categories and documenting which ones are relevant and why. For the material ones, choose the best available method, from spend-based estimates to supplier-specific data. Be honest about the mix: a spend-based calculation is acceptable if you label it and explain the limits.
Several habits help Scope 3 stand up to review:
- Keep the screening rationale on file. Excluding a category without a written reason invites challenge.
- Track data quality by category. Mark what is primary data, what is secondary, and what is estimated.
- Store supplier evidence. Keep questionnaires, product carbon footprints, and correspondence alongside the calculation.
- Plan the upgrade path. Show which categories you will move to supplier-specific data next year.
All of this takes time and specialist knowledge, which many teams do not have in the middle of a reporting cycle.
What should you do when internal capacity is limited?
When internal capacity is limited, focus first on the highest-risk datapoints, simplify the process to a few owners and templates, and bring in outside specialists for the parts that need experience. Temporary support lets a small team meet fixed deadlines without hiring permanent staff.
A realistic approach is to split the work. Keep ownership of data and decisions in-house, and borrow expertise for tasks like building the methodology, setting up controls, or running a Scope 3 screening. Do a readiness check early, ideally before data collection starts, so gaps surface while there is still time to fix them. Many teams also find that a short interim project is cheaper and faster than recruiting, especially when the workload peaks only once a year.
The next section shows how this can work in practice.
How Dazzle helps with assurance-ready ESRS E1 climate data
Dazzle connects you with experienced CSRD consultants and ESRS reporting experts who have hands-on experience with climate data collection. Only the top 10% of applicants join the network, and we match you with a relevant expert within 48 hours, which suits tight reporting timelines. You can search for a matching expert or browse our experts directly.
Depending on your needs, a Dazzle expert can support you with:
- Datapoint and gap analysis: Reviewing which ESRS E1 datapoints apply and where your evidence is weakest.
- Data owner mapping: Building the ownership matrix and collection calendar across departments.
- Control design: Setting up validation, reconciliation, and review steps that an auditor can test.
- Methodology documentation: Writing up emission factors, assumptions, and calculation methods in an audit-ready format.
- Scope 3 support: Screening categories, calculating value-chain emissions, and improving data quality.
- Interim capacity: Providing project-based, interim, remote, hybrid, or on-site support that scales up or down with your reporting cycle.
You keep ownership of your reporting while your team gains practical knowledge along the way. To see how this could work for your organisation, visit the Dazzle platform and tell us what you need.
If you’re interested in learning more, contact our team of experts today.